Search This Blog

Archive for December 2022

MTCEC-0105 Low Cost Building Materials and Construction Techniques syllabus notes and pdf

SWAMI VIVEKANAND UNIVERSITY, SIRONJA, SAGAR (M.P.) SYLLABUS For MASTERS IN TECHNOLOGY (CONSTRUCTION TECHNOLOGY & MANAGEMENT) Course Code: MTCTM Department of Civil Engineering Faculty of Engineering Duration of Course: 2Year Examination Mode: Semester Examination System: Grading Swami Vivekanand University, Sironja, Sagar (M.P.) 2016-2017

syllabus notes and pdf

UNIT- 1 MARKS 14

Concepts of low-cost materials Soil, Fly ash, ferrocement, Lime, Fibers, Stone Dust, Boulders and oversize metal, Bitumen etc.

UNIT- 2 MARKS 14

Low cost building material products:- (a) Walls - Stabilized and sun-dried, soil blocks & bricks, Hollow concrete blocks, stone masonry blocks, Ferro-cement partitions. (b) Roofs - Precast R.C. Plank & Joists roof, Precast channel roof, Precast L-panel roof, Precast Funicular shells, Ferrocement shells, Filler Slab, Seasal Fibre roof, Improved country tiles, Thatch roof.

UNIT- 3 MARKS 14

Low-cost construction Techniques and Equipment (a) Techniques: - Rat trap bond construction, Precast R.C. and Ferrocement technique, Mud Technology, (b) Equipment: - Brick moulding machine, Stabilized soil block making machine and plants for the manufacturing of concrete blocks, (c) Low Cost Roads

UNIT- 4 MARKS 14

Low-cost sanitation:- (a) Waste water disposal system, (b) Low cost sanitation for rural and urban areas (c) Ferrocement Drains

UNIT- 5 MARKS 14

Cost analysis and comparison (a) Low-cost materials (b) Low-cost techniques

Swami Vivekanand University, Sagar(M.P.)

TEXTBOOKS:

1. Civil Engineering Construction Technology By Rangwala

2. Construction Tecgneques By B.C. Punmia

REFERENCE BOOKS:

1. Highway Engineering Bu Khanna & Justo

2. Waste Water & Waste Management By B.C. Punmia

3. Concrete Technology By Dr. Ramamurtham

Friday, December 16, 2022
Posted by Saurabh Gupta

MTCEC-0104 - Construction Technology syllabus notes and pdf

 SWAMI VIVEKANAND UNIVERSITY, SIRONJA, SAGAR (M.P.) SYLLABUS For MASTERS IN TECHNOLOGY (CONSTRUCTION TECHNOLOGY & MANAGEMENT) Course Code: MTCTM Department of Civil Engineering Faculty of Engineering Duration of Course: 2Year Examination Mode: Semester Examination System: Grading Swami Vivekanand University, Sironja, Sagar (M.P.) 2016-2017

syllabus notes and pdf

MTCEC-0104 - Construction Technology

UNIT- 1 MARKS 14

Advanced Pavement Construction Techniques: Pavement Construction using Bitumen, Hot mix plant, Concrete Road Construction, Fibre Reinforced Pavement Construction, Low-Cost Road Construction Techniques.

UNIT- 2 MARKS 14

Form Work and Temporary Structures: Design and construction features of different types of Temporary Structures. Stationary and slip form work Techniques, Special features of in situ construction. Stripping and Removal of form works, Formworks for special structures e.g. shells, bridges, towers etc.

UNIT- 3 MARKS 14

Steel Construction: Shop and in situ construction techniques, different connections. High-strength bolts,

Clearances and Tolerances, Erection of steel structures like Bridges, Trusses Chimneys, and Power Houses.

UNIT- 4 MARKS 14

Prestressing: Plants, Equipment for Prestressed Construction, Different Techniques of Prestressing. Prestressing of Bridge girders, water tanks and special structures

UNIT- 5 MARKS 14

Construction Techniques of Heavy and Special Structures: Dams, Bridges, large span roofs, high rise Buildings, off shore Platforms, Pipelines, Tunnels and other undergroundS structures, Safety measures in Construction.

Swami Vivekanand University, Sagar(M.P.)

MTCEC-0104 - Construction Technology

TEXT BOOKS:

1.Civil Engineering Construction Technology By Rangwala

2.Construction Tecgneques By B.C. Punmia

REFRENCES:

1.Highway Engineering By Khanna & Justo

2.Prestressed Concrete By B.C. Punmia

3.Prestressed Concrete By N.K. Raju

Posted by Saurabh Gupta

MTCEC-0103 - Advanced Geotechnical Engineering syllabus notes and pdf

 SWAMI VIVEKANAND UNIVERSITY, SIRONJA, SAGAR (M.P.) SYLLABUS For MASTERS IN TECHNOLOGY (CONSTRUCTION TECHNOLOGY & MANAGEMENT) Course Code: MTCTM Department of Civil Engineering Faculty of Engineering Duration of Course: 2Year Examination Mode: Semester Examination System: Grading Swami Vivekanand University, Sironja, Sagar (M.P.) 2016-2017

syllabus notes and pdf

UNIT- 1 MARKS 14Site Investigations & Stress Distribution in soils : Brief review of vearious methods of subsurface explorations,

soil sampling, subsurface soundings, Geophysical explorations. Stress distribution beneath loaded areas by

Boussinesq Westergaard's and Steinbrenner methods. Newmark's influence chart. Contact pressure distribution.

Settlement analysis.

UNIT- 2 MARKS 14Well Foundations & Coffer Dams : Types of caissons , Wells, and their design criteria. IS and IRC codes and

their provisions. Tilt and Shift in wells and their rectifications, Types, Design data for cellular dams, stability

analysis. interlock Stresses, Methods of design of cellular coffer dams.

UNIT- 3 MARKS 14Machine Foundations: Theory of Vibrations. Single and double degree of freedom system, Damped and

undamped vibrations, Types of machine foundations, mass spring model of analysis. Apparant mass of soil,

Design of block foundations for impact type of machinery, Indian standard on Design and Construction of

Foundations for Reciprocating machines

UNIT- 4 MARKS 14Foundations on Expansive Soils: Characteristics and treatment of expansive soils. Construction techniques in

expansive soils, Use of under-reamed piles and their design criteria, CNS Layer techniques. Construction on

collapsible soil

UNIT- 5 MARKS 14Rock Mechanics: Problems in Rock mechanics, Classification of rocks, physical, geological and Mechanical

properties of rocks, mechanics of rock, deformation and fracture under load, The range and scope of Rock

mechanics in relation to civil engineering projects

TEXT BOOKS:

1. GEOTECHNICAL ENGINEERING BY B.C. PUNMIA

2. SOLI ENGINEERING BY Dr. R.K. ARORA

Posted by Saurabh Gupta

syllabus notes and pdf MTCEC-0102 - Construction Materials

 SWAMI VIVEKANAND UNIVERSITY, SIRONJA, SAGAR (M.P.) SYLLABUS For MASTERS IN TECHNOLOGY (CONSTRUCTION TECHNOLOGY & MANAGEMENT) Course Code: MTCTM Department of Civil Engineering Faculty of Engineering Duration of Course: 2Year Examination Mode: Semester Examination System: Grading Swami Vivekanand University, Sironja, Sagar (M.P.) 2016-2017


UNIT- 1 MARKS 14

Material Science: Classification, Standardisation, Codification and Variety. Details of Micro Structure of Different construction Materials, Different effects on materials of construction.

UNIT- 2 MARKS 14

Properties of Materials: Environmental Influences: Thermal effects : Effect of Chemicals, Fire resistance, Corrosion and Oxidation, Radiation. Properties of fresh & hardened concrete, Shrinkage & creep of concrete

UNIT- 3 MARKS 14Concrete: Design and production of concrete ingredients, Additives and admixtures. Special Concretes e.g. lightweight, Heavyweight, Ready mix concrete, Fibre Reinforced concrete etc.

UNIT- 4 MARKS 14

New Construction Materials: Polymer materials, Thermo - Plastic, Polymer Concrete, Composite materials, Ferrocement, Ferroconcrete, and Building materials from Agricultural & Industrial wastes.

UNIT- 5 MARKS 14

Quality control in construction: Various aspects, Principle of statistical quality control. Different techniques of materials and process Quality control, Destructive and non-destructive Testing of Materials, I.S. and international procedures of testing

Swami Vivekanand University, Sagar(M.P.)

MTCEC-0102 - Construction Materials


TEXT BOOKS:

1. Ammer, D.A. Material Management Irwin Publishers Illionis, 1972.

2. White A.H. Engineering materials, MC Graw - Hill.

3. Deb. A., Engineerig materials, world press.

References :

1. Billmeyer Jr. F.W. Text Book of Polymer Science, Interscience Publishers Inc.

2. Golding Brage Polymers and Resins Nortrand.

3. Schmidt A.X. & Marties CA "Principle of High Polymer Theory & Practice" MC Graw - Hill.

4. Stille, J.K. "Introduction to Polymer Chemistry" Johwiley.

5. Winding C.C. & Hiatt G.D. "Polymetric".

Posted by Saurabh Gupta

MTCEC-0101 – Advance Engineering Mathematics syllabus notes and pdf


SWAMI VIVEKANAND UNIVERSITY, SIRONJA, SAGAR (M.P.) SYLLABUS For MASTERS IN TECHNOLOGY (CONSTRUCTION TECHNOLOGY & MANAGEMENT) Course Code: MTCTM Department of Civil Engineering Faculty of Engineering Duration of Course: 2Year Examination Mode: Semester Examination System: Grading Swami Vivekanand University, Sironja, Sagar (M.P.) 2016-2017


UNIT- 1 MARKS 14

Numerical solution of Partial Differential Equation (PDE): Numerical solution of PDE of hyperbolic, parabolic

and elliptic types by finite difference method.

UNIT- 2 MARKS 14

Integral transforms: general definition, introduction to Mellin, Hankel and Fourier transforms and fast Fourier

transforms, application of transforms to boundary value problems in engineering.

UNIT- 3 MARKS 14

Integral equations: Conversion of Linear Differential equation (LDE) to an integral equation (IE), conversion of

boundary value problems to integral equations using Green's function, solution of Integral equation, IE of

convolution type, Abel's IE, Integro differential equations, IE with separable variable, solution of FredholmEquation with separable kernels, solution of Fredholm and Volterra equations by the method of successive

approximations.

UNIT- 4 MARKS 14

Calculus of Variation: Functionals and their Variational, Euler's equation for the function of one and two independent

variables, application to engineering problems.

UNIT--5 MARKS 14

FEM: Variational functionals, Euler Lagrange's equation, Variational forms, Ritz methods, Galerkin's method, discretization, finite element method for one-dimensional problems.


TEXT BOOKS:

1. Higher Engineering Mathematics by B.V. Ramana, Tata Mc Hill.

2. Advance Engineering Mathematics by Ervin Kreszig, Wiley Easten Edd.

3. Applied Numerical Methods with MATLAB by Steven C Chapra, TMH

Reference Books:

1. CF Froberg, Introduction to numerical analysis.

2. SS Sastry, Introductory methods of numerical analysis

3. Krasnove, Kiselevanded Makarenho, Integral equations

4. Buchanan, Finite element Analysis (schaum Outline S), TMH

5. Krishnamurthy, Finite element analysis, TMH

6. Numerical Methods in engineering, Salvadori and Baron

7. Theory and problems of Numeric analysis (Schaum Outline S), Schied, TMH

Posted by Saurabh Gupta

MVCT/MVCP-301(A) Exam paper December 2016

Previous year paper Mtech CTM 3rd Sem RGPV MVCT 301 A

 MVCT/MVCP-301(A)

M.EyM.Tech., Ill Semester
Examination, December 2016
Advance Highway Construction (Elective-i)
Time: Three Hours


Note i) Attempt any five questions.
ii) All questions carry equal marks.
iii) Assume suitable data if necessary.

1. Give the classification of types of highway construction.
2. Discuss the following:
a) Stone Soiling
b
) Brick Soiling
3
. Briefly discuss the following interface treatments:
a) Prime Coat
b) Tack Coat

4. How is quality control attained in bituminous construction?

5. What is the necessity of providing a base course under cement
concrete
road construction? Also, discuss the following:
a) Dowel Bars
b
) Tie Bars

6. Discuss the followings:
a
) Classification of Various Types of Joints
b
) Necessity of Providing each Type
c) Method of construction of Joints
7. Discuss the following:
a) Prestressed concrete pavements
b) Fiber-reinforced concrete pavements

8. Discuss the use of CPM and PERT in Highway construction







Monday, December 12, 2022
Posted by Saurabh Gupta

MVCT/MVCP-301(A) Examination, June 2016 MVCT 301

 MVCT/MVCP-301(A)

M.E/MTech, Ill Semester
Examination, June 2016
Advance Highway Construction (Elective-I)
TimeThree Hours



1. Discuss the classification of types of highway construction with the suitability of each type under Indian conditions.

2. Discuss various field and laboratory tests for quality control of embankment construction.

3. a) Discuss bituminous bound macadam.
       b) Discuss MOST specifications for bituminous construction.

4. a) Compare alternate bay and continuous bay methods of construction of cement concrete roads,
    b) What are the requirements of materials, plants, and equipment for C.C. road construction?

5.  a) Explain with sketches the requirements of joint filter and sealer. Discuss the desirable properties and the various materials in use.
b) Discuss the use of CPM/PERT in highway construction.

6. a) Explain the different methods of waste disposal from the construction industry.
b) Differentiate between capital budgeting and performance budgeting. 

7. a) Explain the break-even analysis in detail,
b) Explain the following terms:
    i
) Financial ratio analysis
    ii
) Sinking fund provision

8. a) Explain the role of different financial institutes in the development of the infrastructure in our country.

b) Enlist different types of financial statements maintained in the government departments and briefly describe them

9. Write a short note on (any four):
a
) Role of legislation in waste management
b) Economic theories
c
) Accounting procedures
d) Labour laws and Acts
e
) Principles of wages and salary


Posted by Saurabh Gupta

MVCT/MVCP-301(A) M.E./M.Tech., III Semester Examination, June 2020 Advanced Highway Construction


MVCT/MVCP-301(A)
M.E./M.Tech., III Semester Examination, June 2020
Advanced Highway Construction
(Elective-I)
Time: Three Hours
Maximum Marks: 70
Note 
i) Attempt any five questions.
ii) All questions carry equal marks.
iii) Solve all parts of any question continuously at the same place.

 1. Answer any two parts of the question.

  1. Differentiate Embankment and Subgrade. Briefly explain the compaction procedure during the construction of the embankment and subgrade. 7
  2.  Classify various types of granular layers in the flexible and rigid pavement. Mention various properties to be considered for quality control and quality assurance. 7
  3. Define Stabilization. Explain mechanical stabilization and Chemical stabilization. 7
2. Answer any one part of the question.
  1. Classify various types of bituminous bases and wear courses for roads. Explain various quality control parameters of bituminous base and wearing courses to be ensured during construction. 14
  2. Define: 14
    1. i) Prime Coat
    2. Tack Coat
    3. Seal Coat
      Explain the significance of Prime coat, tack coat and seal coat. Also, enlist materials used in these layers.
  3. Answer any one part of the question.
    1.  List out various quality control tests to be performed in field for cement concrete pavements. Briefly explain various quality control aspects to be considered during the construction of pavement quality concrete layer. 14
    2. Explain the detailed procedure of construction of various types of joints in rigid pavements. 14
  4. Answer any one part of the question.
    1.  Explain the design procedure of continuous reinforced concrete pavements as per IRC code with a neat sketch. 14
    2. Differentiate the fundamental philosophy of conventional cement concrete pavement and continuously reinforced concrete pavements with neat sketches. Explain the advantages of continuous reinforced concrete pavements. 14
  5. Answer any one part of the question. 
    1. Elaborate the fundamental concept of Project management. Write a short note on Planning
      and Scheduling phase in project management. Mention the typical guidelines for network
      construction. 14
    2. Briefly explain the detailed procedure of the Critical Path Method with an example of the typical highway project. 14
  6. Briefly explain the detailed procedure of design of Bituminous mixes for the construction of Bituminous layers. 7
    1.  Classify various types of Bituminous Binders and Mention the criteria for the selection o of Bitumen binders and Bituminous mixes for bituminous layers. 7
  7.  a) Draw a neat sketch of the expansion joint and indicate all necessary elements as per the Indian Road Congress code. 7
    1. b) Write any seven points on various internal drainage measures to be taken during the construction of flexible pavement at water logging areas. 7
  8.  a) Explain the significance of reinforcement in cement concrete pavement and fibre reinforcement in concrete pavement. 7
    b) Explain the fundamental philosophy of the PERT technique. 





Posted by Saurabh Gupta

Telegram

Notes for M.Tech. CTM (Construction Technology Management) available strictly as per syllabus for all three-semester available. Features: • Notes from Gold Medalist student • Handwritten crisp to the point notes • Printed notes • Video notes of some subjects • Previous year question paper • Solved question paper • Subject/Unit wise arranged • Objective question paper for online exam M.Tech. complete thesis support also available. Join telegram group https://t.me/+cj3WhHbC86syMTdl Complete Mtech Thesis support available: 1) Synopsis 2) Synopsis PPT 3) Thesis 4) Thesis PPT 5) Conference paper These are included in the package Those who only want guidance, msg me for more information https://t.me/+cj3WhHbC86syMTdl
Related Posts Plugin for WordPress, Blogger...

Popular Post

Blogger templates


Copyright @ NotesCivil 2013-2016. Powered by Blogger.

Total Pageviews

- Copyright © CIVIL Engineering STUDY Material , NOTES , Free Ebook